当前位置:网站北京赛车pk拾后二 > 资讯中心 > 行业资讯 行业资讯 【COMPANY NEWS】

  • 用途不同对窗户设计有哪些要求?
  • 本站编辑:杭州腾凯门窗北京赛车pk拾后二发布日期:2018-07-11 17:30 浏览次数:
铝合金门窗05
 
门窗在设计上针对不同的位置有哪些设计要求?
What are the design requirements for different locations of doors and windows?
1、卧室及客厅一般设计为平开内倒窗或内平开窗,平开系列窗具有气密、水密及隔声效果好的特点,同时开启方便、安全、易清洁,也满足卧室、客厅大通风的使用功能要求。
1, the bedroom and the living room are generally designed for flat open window or flat window. The flat opening series windows have the characteristics of air tightness, water tightness and sound insulation effect. At the same time, it is convenient, safe and easy to clean. It also meets the function requirements of the large ventilation in the bedroom and the living room.
2、卫生间窗一般洞口较。?椅?赋ば,通常设计为翻窗系列,又以内翻窗为主,满足小通风换气要求,开启时不占使用空间,但缺点是开启状态防雨性不好。外翻窗开启关闭过程人手臂需伸出窗外,安全性差,且开启角度受限制。
2, toilet window general hole is small, and slender type, usually designed to turn the window series, and inside the window, to meet the requirements of small ventilation, open the use of space, but the disadvantage is that the open state of rain resistance is not good. During the opening and closing process of the valgus window, the human arm needs to be extended out of the window, with poor safety and limited opening angle.
3、餐厅及厨房窗的设计应根据工程实际的窗洞口大小及房间布局、外立面装饰要求等关联方面去设计,设计成平开窗、翻窗都可以,没有固定模式。
3, the design of the restaurant and kitchen window should be designed according to the actual size of the hole of the window, the layout of the room and the requirements of the facade decoration. The design of the window and the window can be made, and there is no fixed mode.
4、楼梯间、过道等公用场合窗因保温性能要求低,可保养维修性差,一般设计为推拉窗,开启不占室内空间,可避免刮碰,便于维护保养,同时成本低,经济性好。
4, staircase, aisle and other public window because of low thermal insulation performance requirements, maintenance of poor maintainability, generally designed to push and pull windows, open no room space, can avoid scraping, easy maintenance, at the same time low cost, good economy.
5、小学学校、幼儿园等建筑应采用外平开窗或推拉窗,避免孩童磕碰受伤。
5, primary schools, kindergartens and other buildings should use flat windows or sliding windows to prevent children from bumping against injuries.
6、特殊位置窗一定要充分考虑其都有哪些使用功能要求,并尽量满足之。比如门卫室就一定要有小的值班窗口,一般为推拉窗,饭厅食堂要有取饭口等特殊功能要求。
6, special location windows must take full account of their functional requirements and try to satisfy them. For example, the gatehouse must have a small duty window, usually a sliding window, and the dining hall should have special functional requirements such as taking food outlets.
7、在窗型设计上也要与工程价位结合起来,充分为业主考虑,做到经济适用,比如主卧室或客厅窗这些主要使用功能窗,可以设计成内开内倒窗,其它次要位置的窗就可以设计为单平开窗。
7, in the window design also should be combined with the price of the project, fully for the owners to consider, to achieve economic application, such as the main bedroom or living room window, such as the main use of functional windows, can be designed into inside open windows, other secondary windows can be designed as a single flat window.